|
| Product Type |
Motion controller |
| System Bus |
PCI (32-bit, 5V keyed) |
| Number of Channels |
4 |
| More Info |
|
| Interrupts |
Interrupt Controller:
- Controller Type: 8259 programmable interrupt controller
- Configuration: Polled mode only
- Interrupts: INTA#- mapped to IRQn via PCI BIOS at boot-time
- Interrupt Enable: Programmable through PLX9052 INTCSR
- Interrupt Polarity: High or low level; programmable through PLX9052;
rising/falling edge;programmable through PLX9052
- Interrupt Sources: All carry/borrow outputs from LS7266RI, all index inputs
|
| Counters |
- Counter Type: LS7266RI 24-bit, dual-axis quadrature counter
- Quadrature Mode Clock Frequency: 4.3MHz max.
- Quadrature Mode Separation: 57ns min.
- Quadrature Mode Clock Pulse Width: 115ns min.
- Quadrature Mode Index Pulse Width: 85ns min.
- Count Mode Clock Frequency: 30MHz max.
- Count Mode Clock A High Pulse Width: 14ns min.
- Count Mode Clock A Low Pulse Width: 14ns min.
- Filter Clock: 10MHz
- Digital Filter Rate: 10MHz, software-selectable divider (1 to 256 in single
steps)
- Crystal Oscillator Frequency: 10MHz
- Crystal Oscillator Frequency Accuracy: 100 ppm
|
| Specifications Details |
Input:
- Receiver Type: SN75ALS175 quad differential receiver
- Configuration (each channel): Phase A input, Phase B input and index input.
Each input is jumper-selectable as SE or differential
- Number of Channels: 4
- Common Mode Input Voltage Range: ±12V max.
- Differential Input Voltage Range: ±12V max.
- Input Sensitivity: ±200mV
- Input Hysteresis: 50mV typ.
- Input Impedance: 12 kohm min.
- Propagation Delay: 27ns max.
- Absolute Max. Input Voltage Differential: ±14V max.
|
|
| Power Consumption |
- +5V @ 325mA typ. 460mA max., not supplying owr to external encoders)
- +5V @ 1058mA typ.; 1479mA max. (supplying pwr to typ. external encoders)
|
|
| Connector #1 |
Number of Connectors |
1 |
Type |
DB-37 (37-pin) | Gender |
Female (socket) | Location |
Backplate of board | |
| Software Features |
Includes Universal Driver and LabVIEW® libraries, as well as drivers for Window® 2000 and XP |
|
| Operating Temperature |
32°F....158°F
(0°C....70°C)
|
| Storage Temperature |
-40°F....212°F
(-40°C....100°C)
|
| Relative Humidity, noncondensing |
0%....90% |
|
| Safety/Approvals |
Meets CE standards
Meets EMC Directive 89/336/EEC |